sand blast

Looking for someone or some place that will sand blast my whole blaster frame,a-arms,swingarm,front and rear bumper, skid plates. So I can weld some spots and get it powder coated

i got a guy up buy you that can do it I'll call him tomorrow and see what he will charge U

ok thanks

He said around 60 for all of it if your intrested just send me a pm and I'll get you the guys #

thanks Mike, always good to have someone so connected with people that can do anything we need, thank you brother.

Wow, that seams really resonable Mike.....Atta Boy!

Hey Ruiz
do you have stock a-arms ?
if you do you will need to make sure that all the grease and the rubber graments are off and make sure it doesnt have nylon inserts for the ball joints

By the way I also powdercoat I didnt know if you new that

yeah I knew you powder coated I was going ask you next how much you would charge me. I do have the stock a-arms on also stock swing arm on with chain guide and there is no way that I know to get it off.

I have problem with a-arms and it is that the ball joints are there and to me and what I've heard they wont come out. The only thing I've heard to solve this is buy aftermarket a-arms and I dont want to do that. I've heard you can bake them at a lower temp at a longer bake time, but I don't know anything about that.

Thats correct Nick, stock ones do not come apart.

Yea I new they didnt come apart but with the powder i have you have to bake at 400 degrees or it dont cure right
I have a stock banshee a-arm I may do some experimenying with it
The only problem I really see is getting the grease back in the ball joints with out a grease zert

yeah I was also wondering about putting the grease back in